; generated by PrusaSlicer 2.9.6 on 2026-10-04 at 12:46:06 UTC

; 

; external perimeters extrusion width = 0.45mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.45mm
; top infill extrusion width = 0.45mm
; first layer extrusion width = 0.70mm

M104 S200 ; set temperature
;TYPE:Custom
G28 ; home all axes
G1 Z5 F5000 ; lift nozzle
M109 S200 ; set temperature and wait for it to be reached
G21 ; set units to millimeters
G90 ; use absolute coordinates
M82 ; use absolute distances for extrusion
G92 E0
; Filament gcode
M107
;LAYER_CHANGE
;Z:0.35
;HEIGHT:0.35
G1 E-2 F2400
G92 E0
G1 Z.35 F7800
G1 X84.775 Y85.871
G1 E2 F2400
;TYPE:Skirt/Brim
;WIDTH:0.7
G1 F1800
G1 X86.516 Y84.465 E2.20349
G1 X89.55 Y83.688 E2.48827
G1 X110.45 Y83.688 E4.3887
G1 X112.653 Y84.084 E4.59223
G1 X114.579 Y85.225 E4.79579
G1 X115.985 Y86.966 E4.99928
G1 X116.762 Y90 E5.28406
G1 X116.762 Y110 E7.10265
G1 X116.366 Y112.203 E7.30618
G1 X115.225 Y114.129 E7.50974
G1 X113.484 Y115.535 E7.71323
G1 X110.45 Y116.312 E7.99801
G1 X89.55 Y116.312 E9.89844
G1 X87.347 Y115.916 E10.10197
G1 X85.421 Y114.775 E10.30553
G1 X84.015 Y113.034 E10.50902
G1 X83.238 Y110 E10.7938
G1 X83.238 Y90 E12.61239
G1 X83.634 Y87.797 E12.81592
G1 X84.744 Y85.923 E13.01397
G1 E11.01397 F2400
G92 E0
G92 E0
G1 X109.9 Y109.65 F7800
G1 E2 F2400
;TYPE:External perimeter
G1 F1800
G1 X109.9 Y90.35 E3.75494
G1 X110.1 Y90.35 E3.77313
G1 X110.1 Y109.65 E5.52807
G1 X109.96 Y109.65 E5.5408
G1 X109.901 Y109.254 F7800
;LAYER_CHANGE
;Z:0.55
;HEIGHT:0.2
G1 Z.55 F7800
G1 X109.775 Y109.775
;WIDTH:0.45
G1 F600
G1 X109.775 Y90.225 E6.20254
G1 X110.225 Y90.225 E6.21777
G1 X110.225 Y109.775 E6.87951
G1 X109.835 Y109.775 E6.89271
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:0.75
;HEIGHT:0.2
G1 Z.75 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E7.55445
G1 X110.225 Y90.225 E7.56968
G1 X110.225 Y109.775 E8.23142
G1 X109.835 Y109.775 E8.24462
G1 X109.776 Y109.379 F7800
M106 S255
;LAYER_CHANGE
;Z:0.95
;HEIGHT:0.2
G1 Z.95 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E8.90636
G1 X110.225 Y90.225 E8.92159
G1 X110.225 Y109.775 E9.58333
G1 X109.835 Y109.775 E9.59653
G1 X109.776 Y109.379 F7800
M106 S252.45
;LAYER_CHANGE
;Z:1.15
;HEIGHT:0.2
G1 Z1.15 F7800
G1 X109.775 Y109.775
G1 F900
G1 X109.775 Y90.225 E10.25827
G1 X110.225 Y90.225 E10.2735
G1 X110.225 Y109.775 E10.93524
G1 X109.835 Y109.775 E10.94844
G1 X109.776 Y109.379 F7800
G1 E8.94844 F2400
G92 E0
G1 X99.775 Y109.775 F7800
G1 E2 F2400
G1 F900
G1 X99.775 Y90.225 E2.66174
G1 X99.775 Y109.715 E3.32145
G1 X99.775 Y109.315 F7800
M106 S255
;LAYER_CHANGE
;Z:1.35
;HEIGHT:0.2
G1 E1.32145 F2400
G92 E0
G1 Z1.35 F7800
G1 X109.775 Y109.775
G1 E2 F2400
G1 F600
G1 X109.775 Y90.225 E2.66174
G1 X110.225 Y90.225 E2.67697
G1 X110.225 Y109.775 E3.33871
G1 X109.835 Y109.775 E3.35191
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:1.55
;HEIGHT:0.2
G1 Z1.55 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E4.01365
G1 X110.225 Y90.225 E4.02888
G1 X110.225 Y109.775 E4.69062
G1 X109.835 Y109.775 E4.70382
G1 X109.776 Y109.379 F7800
M106 S252.45
;LAYER_CHANGE
;Z:1.75
;HEIGHT:0.2
G1 Z1.75 F7800
G1 X109.775 Y109.775
G1 F900
G1 X109.775 Y90.225 E5.36556
G1 X110.225 Y90.225 E5.38079
G1 X110.225 Y109.775 E6.04253
G1 X109.835 Y109.775 E6.05573
G1 X109.776 Y109.379 F7800
G1 E4.05573 F2400
G92 E0
G1 X99.775 Y109.775 F7800
G1 E2 F2400
G1 F900
G1 X99.775 Y90.225 E2.66174
G1 X99.775 Y109.715 E3.32145
G1 X99.775 Y109.315 F7800
M106 S255
;LAYER_CHANGE
;Z:1.95
;HEIGHT:0.2
G1 E1.32145 F2400
G92 E0
G1 Z1.95 F7800
G1 X109.775 Y109.775
G1 E2 F2400
G1 F600
G1 X109.775 Y90.225 E2.66174
G1 X110.225 Y90.225 E2.67697
G1 X110.225 Y109.775 E3.33871
G1 X109.835 Y109.775 E3.35191
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:2.15
;HEIGHT:0.2
G1 Z2.15 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E4.01365
G1 X110.225 Y90.225 E4.02888
G1 X110.225 Y109.775 E4.69062
G1 X109.835 Y109.775 E4.70382
G1 X109.776 Y109.379 F7800
M106 S252.45
;LAYER_CHANGE
;Z:2.35
;HEIGHT:0.2
G1 Z2.35 F7800
G1 X109.775 Y109.775
G1 F900
G1 X109.775 Y90.225 E5.36556
G1 X110.225 Y90.225 E5.38079
G1 X110.225 Y109.775 E6.04253
G1 X109.835 Y109.775 E6.05573
G1 X109.776 Y109.379 F7800
G1 E4.05573 F2400
G92 E0
G1 X99.775 Y109.775 F7800
G1 E2 F2400
G1 F900
G1 X99.775 Y90.225 E2.66174
G1 X99.775 Y109.715 E3.32145
G1 X99.775 Y109.315 F7800
M106 S255
;LAYER_CHANGE
;Z:2.55
;HEIGHT:0.2
G1 E1.32145 F2400
G92 E0
G1 Z2.55 F7800
G1 X109.775 Y109.775
G1 E2 F2400
G1 F600
G1 X109.775 Y90.225 E2.66174
G1 X110.225 Y90.225 E2.67697
G1 X110.225 Y109.775 E3.33871
G1 X109.835 Y109.775 E3.35191
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:2.75
;HEIGHT:0.2
G1 Z2.75 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E4.01365
G1 X110.225 Y90.225 E4.02888
G1 X110.225 Y109.775 E4.69062
G1 X109.835 Y109.775 E4.70382
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:2.95
;HEIGHT:0.2
G1 Z2.95 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E5.36556
G1 X110.225 Y90.225 E5.38079
G1 X110.225 Y109.775 E6.04253
G1 X109.835 Y109.775 E6.05573
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:3.15
;HEIGHT:0.2
G1 Z3.15 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E6.71747
G1 X110.225 Y90.225 E6.7327
G1 X110.225 Y109.775 E7.39444
G1 X109.835 Y109.775 E7.40764
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:3.35
;HEIGHT:0.2
G1 Z3.35 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E8.06938
G1 X110.225 Y90.225 E8.08461
G1 X110.225 Y109.775 E8.74635
G1 X109.835 Y109.775 E8.75955
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:3.55
;HEIGHT:0.2
G1 Z3.55 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E9.42129
G1 X110.225 Y90.225 E9.43652
G1 X110.225 Y109.775 E10.09826
G1 X109.835 Y109.775 E10.11146
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:3.75
;HEIGHT:0.2
G1 Z3.75 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E10.7732
G1 X110.225 Y90.225 E10.78843
G1 X110.225 Y109.775 E11.45017
G1 X109.835 Y109.775 E11.46337
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:3.95
;HEIGHT:0.2
G1 Z3.95 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E12.12511
G1 X110.225 Y90.225 E12.14034
G1 X110.225 Y109.775 E12.80208
G1 X109.835 Y109.775 E12.81528
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:4.15
;HEIGHT:0.2
G1 Z4.15 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E13.47702
G1 X110.225 Y90.225 E13.49225
G1 X110.225 Y109.775 E14.15399
G1 X109.835 Y109.775 E14.16719
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:4.35
;HEIGHT:0.2
G1 Z4.35 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E14.82893
G1 X110.225 Y90.225 E14.84416
G1 X110.225 Y109.775 E15.5059
G1 X109.835 Y109.775 E15.5191
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:4.55
;HEIGHT:0.2
G1 Z4.55 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E16.18084
G1 X110.225 Y90.225 E16.19607
G1 X110.225 Y109.775 E16.85781
G1 X109.835 Y109.775 E16.87101
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:4.75
;HEIGHT:0.2
G1 Z4.75 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E17.53275
G1 X110.225 Y90.225 E17.54798
G1 X110.225 Y109.775 E18.20972
G1 X109.835 Y109.775 E18.22292
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:4.95
;HEIGHT:0.2
G1 Z4.95 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E18.88466
G1 X110.225 Y90.225 E18.89989
G1 X110.225 Y109.775 E19.56163
G1 X109.835 Y109.775 E19.57483
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:5.15
;HEIGHT:0.2
G1 Z5.15 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E20.23657
G1 X110.225 Y90.225 E20.2518
G1 X110.225 Y109.775 E20.91354
G1 X109.835 Y109.775 E20.92674
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:5.35
;HEIGHT:0.2
G1 Z5.35 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E21.58848
G1 X110.225 Y90.225 E21.60371
G1 X110.225 Y109.775 E22.26545
G1 X109.835 Y109.775 E22.27865
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:5.55
;HEIGHT:0.2
G1 Z5.55 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E22.94039
G1 X110.225 Y90.225 E22.95562
G1 X110.225 Y109.775 E23.61736
G1 X109.835 Y109.775 E23.63056
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:5.75
;HEIGHT:0.2
G1 Z5.75 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E24.2923
G1 X110.225 Y90.225 E24.30753
G1 X110.225 Y109.775 E24.96927
G1 X109.835 Y109.775 E24.98247
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:5.95
;HEIGHT:0.2
G1 Z5.95 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E25.64421
G1 X110.225 Y90.225 E25.65944
G1 X110.225 Y109.775 E26.32118
G1 X109.835 Y109.775 E26.33438
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:6.15
;HEIGHT:0.2
G1 Z6.15 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E26.99612
G1 X110.225 Y90.225 E27.01135
G1 X110.225 Y109.775 E27.67309
G1 X109.835 Y109.775 E27.68629
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:6.35
;HEIGHT:0.2
G1 Z6.35 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E28.34803
G1 X110.225 Y90.225 E28.36326
G1 X110.225 Y109.775 E29.025
G1 X109.835 Y109.775 E29.0382
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:6.55
;HEIGHT:0.2
G1 Z6.55 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E29.69994
G1 X110.225 Y90.225 E29.71517
G1 X110.225 Y109.775 E30.37691
G1 X109.835 Y109.775 E30.39011
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:6.75
;HEIGHT:0.2
G1 Z6.75 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E31.05185
G1 X110.225 Y90.225 E31.06708
G1 X110.225 Y109.775 E31.72882
G1 X109.835 Y109.775 E31.74202
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:6.95
;HEIGHT:0.2
G1 Z6.95 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E32.40376
G1 X110.225 Y90.225 E32.41899
G1 X110.225 Y109.775 E33.08073
G1 X109.835 Y109.775 E33.09393
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:7.15
;HEIGHT:0.2
G1 Z7.15 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E33.75567
G1 X110.225 Y90.225 E33.7709
G1 X110.225 Y109.775 E34.43264
G1 X109.835 Y109.775 E34.44584
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:7.35
;HEIGHT:0.2
G1 Z7.35 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E35.10758
G1 X110.225 Y90.225 E35.12281
G1 X110.225 Y109.775 E35.78455
G1 X109.835 Y109.775 E35.79775
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:7.55
;HEIGHT:0.2
G1 Z7.55 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E36.45949
G1 X110.225 Y90.225 E36.47472
G1 X110.225 Y109.775 E37.13646
G1 X109.835 Y109.775 E37.14966
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:7.75
;HEIGHT:0.2
G1 Z7.75 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E37.8114
G1 X110.225 Y90.225 E37.82663
G1 X110.225 Y109.775 E38.48837
G1 X109.835 Y109.775 E38.50157
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:7.95
;HEIGHT:0.2
G1 Z7.95 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E39.16331
G1 X110.225 Y90.225 E39.17854
G1 X110.225 Y109.775 E39.84028
G1 X109.835 Y109.775 E39.85348
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:8.15
;HEIGHT:0.2
G1 Z8.15 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E40.51522
G1 X110.225 Y90.225 E40.53045
G1 X110.225 Y109.775 E41.19219
G1 X109.835 Y109.775 E41.20539
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:8.35
;HEIGHT:0.200001
G1 Z8.35 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E41.86713
G1 X110.225 Y90.225 E41.88236
G1 X110.225 Y109.775 E42.5441
G1 X109.835 Y109.775 E42.5573
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:8.55
;HEIGHT:0.2
G1 Z8.55 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E43.21904
G1 X110.225 Y90.225 E43.23427
G1 X110.225 Y109.775 E43.89601
G1 X109.835 Y109.775 E43.90921
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:8.75
;HEIGHT:0.2
G1 Z8.75 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E44.57095
G1 X110.225 Y90.225 E44.58618
G1 X110.225 Y109.775 E45.24792
G1 X109.835 Y109.775 E45.26112
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:8.95
;HEIGHT:0.2
G1 Z8.95 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E45.92286
G1 X110.225 Y90.225 E45.93809
G1 X110.225 Y109.775 E46.59983
G1 X109.835 Y109.775 E46.61303
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:9.15
;HEIGHT:0.2
G1 Z9.15 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E47.27477
G1 X110.225 Y90.225 E47.29
G1 X110.225 Y109.775 E47.95174
G1 X109.835 Y109.775 E47.96494
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:9.35
;HEIGHT:0.200001
G1 Z9.35 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E48.62668
G1 X110.225 Y90.225 E48.64191
G1 X110.225 Y109.775 E49.30365
G1 X109.835 Y109.775 E49.31685
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:9.55
;HEIGHT:0.2
G1 Z9.55 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E49.97859
G1 X110.225 Y90.225 E49.99382
G1 X110.225 Y109.775 E50.65556
G1 X109.835 Y109.775 E50.66876
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:9.75
;HEIGHT:0.2
G1 Z9.75 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E51.3305
G1 X110.225 Y90.225 E51.34573
G1 X110.225 Y109.775 E52.00747
G1 X109.835 Y109.775 E52.02067
G1 X109.776 Y109.379 F7800
;LAYER_CHANGE
;Z:9.95
;HEIGHT:0.2
G1 Z9.95 F7800
G1 X109.775 Y109.775
G1 F600
G1 X109.775 Y90.225 E52.68241
G1 X110.225 Y90.225 E52.69764
G1 X110.225 Y109.775 E53.35938
G1 X109.835 Y109.775 E53.37258
G1 X109.776 Y109.379 F7800
G1 E51.37258 F2400
G92 E0
M107
;TYPE:Custom
; Filament-specific end gcode 
;END gcode for filament
M104 S0 ; turn off temperature
G28 X0  ; home X axis
M84     ; disable motors
; objects_info = {"objects":[]}
; filament used [mm] = 83.41
; filament used [cm3] = 0.20
; total filament used [g] = 0.00
; total filament cost = 0.00
; total filament used for wipe tower [g] = 0.00
; estimated printing time (normal mode) = 3m 32s
; estimated first layer printing time (normal mode) = 8s

; prusaslicer_config = begin
; arc_fitting = disabled
; autoemit_temperature_commands = 1
; automatic_extrusion_widths = 0
; automatic_infill_combination = 0
; automatic_infill_combination_max_layer_height = 100%
; avoid_crossing_curled_overhangs = 0
; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_shape = 0x0,200x0,200x200,0x200
; bed_temperature = 0
; bed_temperature_extruder = 0
; before_layer_gcode = 
; between_objects_gcode = 
; binary_gcode = 0
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 3
; bottom_solid_min_thickness = 0
; bridge_acceleration = 0
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 1
; bridge_speed = 60
; brim_separation = 0
; brim_type = outer_only
; brim_width = 0
; chamber_minimal_temperature = 0
; chamber_temperature = 0
; color_change_gcode = M600
; colorprint_heights = 
; complete_objects = 0
; cooling = 1
; cooling_perimeter_transition_distance = 0
; cooling_slowdown_logic = uniform_cooling
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; custom_parameters_filament = ""
; custom_parameters_print = 
; custom_parameters_printer = 
; default_acceleration = 0
; deretract_speed = 0
; disable_fan_first_layers = 3
; dont_support_bridges = 1
; draft_shield = disabled
; duplicate_distance = 6
; elefant_foot_compensation = 0
; enable_dynamic_fan_speeds = 0
; enable_dynamic_overhang_speeds = 0
; end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
; end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
; ensure_vertical_shell_thickness = enabled
; external_perimeter_acceleration = 0
; external_perimeter_extrusion_width = 0
; external_perimeter_speed = 50%
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 1
; extra_perimeters_on_overhangs = 0
; extruder_clearance_height = 20
; extruder_clearance_radius = 20
; extruder_colour = ""
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; extrusion_width = 0.45
; fan_always_on = 0
; fan_below_layer_time = 60
; filament_abrasive = 0
; filament_colour = #29B2B2
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 0
; filament_density = 0
; filament_diameter = 1.75
; filament_flush_speed = 0
; filament_flush_volume = 0
; filament_infill_max_crossing_speed = 0
; filament_infill_max_speed = 0
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 0
; filament_minimal_purge_on_wipe_tower = 15
; filament_multitool_ramming = 0
; filament_multitool_ramming_flow = 10
; filament_multitool_ramming_volume = 10
; filament_notes = ""
; filament_purge_multiplier = 100%
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_seam_gap_distance = 15%
; filament_settings_id = ""
; filament_shrinkage_compensation_xy = 0%
; filament_shrinkage_compensation_z = 0%
; filament_soluble = 0
; filament_spool_weight = 0
; filament_stamping_distance = 0
; filament_stamping_loading_speed = 20
; filament_toolchange_delay = 0
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; fill_angle = 45
; fill_density = 0%
; fill_pattern = stars
; first_layer_acceleration = 0
; first_layer_acceleration_over_raft = 0
; first_layer_bed_temperature = 0
; first_layer_extrusion_width = 200%
; first_layer_height = 0.35
; first_layer_infill_speed = 0
; first_layer_speed = 30
; first_layer_speed_over_raft = 30
; first_layer_temperature = 200
; full_fan_speed_layer = 0
; fuzzy_skin = none
; fuzzy_skin_point_dist = 0.8
; fuzzy_skin_thickness = 0.3
; gap_fill_enabled = 1
; gap_fill_speed = 20
; gcode_comments = 0
; gcode_flavor = reprap
; gcode_label_objects = disabled
; gcode_resolution = 0.0125
; gcode_substitutions = 
; high_current_on_filament_swap = 0
; idle_temperature = nil
; infill_acceleration = 0
; infill_anchor = 600%
; infill_anchor_max = 50
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0
; infill_first = 0
; infill_overlap = 25%
; infill_speed = 80
; interface_shells = 0
; interlocking_beam = 0
; interlocking_beam_layer_count = 2
; interlocking_beam_width = 0.8
; interlocking_boundary_avoidance = 2
; interlocking_depth = 2
; interlocking_orientation = 22.5
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = 
; layer_height = 0.2
; machine_limits_usage = time_estimate_only
; machine_max_acceleration_e = 10000,5000
; machine_max_acceleration_extruding = 1500,1250
; machine_max_acceleration_retracting = 1500,1250
; machine_max_acceleration_travel = 1500,1250
; machine_max_acceleration_x = 9000,1000
; machine_max_acceleration_y = 9000,1000
; machine_max_acceleration_z = 500,200
; machine_max_feedrate_e = 120,120
; machine_max_feedrate_x = 500,200
; machine_max_feedrate_y = 500,200
; machine_max_feedrate_z = 12,12
; machine_max_jerk_e = 2.5,2.5
; machine_max_jerk_x = 10,10
; machine_max_jerk_y = 10,10
; machine_max_jerk_z = 0.2,0.4
; machine_max_junction_deviation = 0,0
; machine_min_extruding_rate = 0,0
; machine_min_travel_rate = 0,0
; max_fan_speed = 100
; max_layer_height = 0
; max_print_height = 200
; max_print_speed = 80
; max_volumetric_extrusion_rate_slope_negative = 0
; max_volumetric_extrusion_rate_slope_positive = 0
; max_volumetric_speed = 0
; min_bead_width = 85%
; min_fan_speed = 35
; min_feature_size = 25%
; min_layer_height = 0.07
; min_print_speed = 10
; min_skirt_length = 0
; mmu_segmented_region_interlocking_depth = 0
; mmu_segmented_region_max_width = 0
; multimaterial_purging = 140
; notes = 
; nozzle_diameter = 0.4
; nozzle_high_flow = 0
; only_one_perimeter_first_layer = 0
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = [input_filename_base].gcode
; over_bridge_speed = 0
; overhang_fan_speed_0 = 0
; overhang_fan_speed_1 = 0
; overhang_fan_speed_2 = 0
; overhang_fan_speed_3 = 0
; overhang_speed_0 = 15
; overhang_speed_1 = 15
; overhang_speed_2 = 20
; overhang_speed_3 = 25
; overhangs = 1
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 0
; perimeter_extruder = 1
; perimeter_extrusion_width = 0
; perimeter_generator = classic
; perimeter_speed = 60
; perimeters = 2
; physical_printer_settings_id = 
; post_process = 
; prefer_clockwise_movements = 0
; print_settings_id = 
; printer_model = 
; printer_notes = 
; printer_settings_id = 
; printer_technology = FFF
; raft_contact_distance = 0.1
; raft_expansion = 1.5
; raft_first_layer_density = 90%
; raft_first_layer_expansion = 3
; raft_layers = 0
; remaining_times = 0
; resolution = 0
; retract_before_travel = 2
; retract_before_wipe = 0%
; retract_layer_change = 0
; retract_length = 2
; retract_length_toolchange = 10
; retract_lift = 0
; retract_lift_above = 0
; retract_lift_below = 0
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 40
; scarf_seam_entire_loop = 0
; scarf_seam_length = 20
; scarf_seam_max_segment_length = 1
; scarf_seam_on_inner_perimeters = 0
; scarf_seam_only_on_smooth = 1
; scarf_seam_placement = nowhere
; scarf_seam_start_height = 0%
; seam_gap_distance = 15%
; seam_position = aligned
; silent_mode = 1
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 1
; skirt_distance = 6
; skirt_height = 1
; skirts = 1
; slice_closing_radius = 0.049
; slicing_mode = regular
; slowdown_below_layer_time = 5
; small_perimeter_speed = 15
; solid_infill_acceleration = 0
; solid_infill_below_area = 70
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0
; solid_infill_speed = 20
; spiral_vase = 0
; staggered_inner_seams = 0
; standby_temperature_delta = -5
; start_filament_gcode = "; Filament gcode\n"
; start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_bottom_contact_distance = 0
; support_material_bottom_interface_layers = -1
; support_material_buildplate_only = 0
; support_material_closing_radius = 2
; support_material_contact_distance = 0.2
; support_material_enforce_layers = 0
; support_material_extruder = 1
; support_material_extrusion_width = 0
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 1
; support_material_interface_layers = 3
; support_material_interface_pattern = rectilinear
; support_material_interface_spacing = 0
; support_material_interface_speed = 100%
; support_material_pattern = rectilinear
; support_material_spacing = 2.5
; support_material_speed = 60
; support_material_style = grid
; support_material_synchronize_layers = 0
; support_material_threshold = 0
; support_material_with_sheath = 1
; support_material_xy_spacing = 50%
; support_tree_angle = 40
; support_tree_angle_slow = 25
; support_tree_branch_diameter = 2
; support_tree_branch_diameter_angle = 5
; support_tree_branch_diameter_double_wall = 3
; support_tree_branch_distance = 1
; support_tree_tip_diameter = 0.8
; support_tree_top_rate = 15%
; temperature = 200
; template_custom_gcode = 
; thick_bridges = 1
; thin_walls = 0
; thumbnails = 
; thumbnails_format = PNG
; toolchange_gcode = 
; toolchange_ordering = optimized
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0
; top_one_perimeter_type = none
; top_solid_infill_acceleration = 0
; top_solid_infill_speed = 15
; top_solid_layers = 3
; top_solid_min_thickness = 0
; travel_acceleration = 0
; travel_lift_before_obstacle = 0
; travel_max_lift = 0
; travel_ramping_lift = 0
; travel_short_distance_acceleration = 0
; travel_slope = 0
; travel_speed = 130
; travel_speed_z = 0
; use_firmware_retraction = 0
; use_relative_e_distances = 0
; use_volumetric_e = 0
; variable_layer_height = 1
; wall_distribution_count = 1
; wall_transition_angle = 10
; wall_transition_filter_deviation = 25%
; wall_transition_length = 100%
; wipe = 0
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 0
; wipe_tower_acceleration = 0
; wipe_tower_bridging = 10
; wipe_tower_brim_width = 2
; wipe_tower_cone_angle = 0
; wipe_tower_extra_flow = 100%
; wipe_tower_extra_spacing = 100%
; wipe_tower_extruder = 0
; wipe_tower_no_sparse_layers = 0
; wipe_tower_width = 60
; wiping_volumes_matrix = 0,140,140,140,140,140,0,140,140,140,140,140,0,140,140,140,140,140,0,140,140,140,140,140,0
; wiping_volumes_use_custom_matrix = 0
; xy_size_compensation = 0
; z_offset = 0
; prusaslicer_config = end