Choose Creality K1C if...
- 220 mm square capacity is sufficient and its current price matters
Creality K1C vs Bambu Lab P1S: Which Should You Buy?
Short answer
Neither printer is a universal winner. Match the stated build volume, enclosure, material guidance, accessory ecosystem and current like-for-like bundle price to the jobs you actually print.
Choose Bambu Lab P1S if...
- you need the larger 256 mm cube and Bambu AMS ecosystem
Price and status context
Creality K1C: $549. Indicative manufacturer-listing price observed; configurations and tax can vary. Status: current.
Bambu Lab P1S: $699. Manufacturer store price observed; base printer only. Status: current.
Prices are indicative, region- and bundle-sensitive, and last checked 2026-09-20. Compare like-for-like base printers, combos and accessories before deciding.
Key differences
| Feature | Creality K1C | Bambu Lab P1S |
|---|---|---|
| Build volume | 220 x 220 x 250 mm | 256 x 256 x 256 mm |
| Enclosure | Enclosed | Enclosed |
| Maximum bed temperature | 100 C | 100 C |
| Multicolour | See the manufacturer documentation for compatible accessories. | Up to 16 colours with compatible AMS units |
Creality K1C vs Bambu Lab P1S in practice
Build volume is a hard constraint: check the longest dimension of your model with the Fit Checker before treating a smaller machine as interchangeable.
Maximum speed figures are manufacturer claims, not InspectMesh benchmark results. Estimate cost from the sliced job, material and waste rather than a headline speed.
Full specifications
| Specification | Creality K1C | Bambu Lab P1S |
|---|---|---|
| Machine dimensions | 220 x 220 x 250 mm | 389 x 389 x 458 mm |
| Maximum nozzle temperature | 300 C | 300 C |
| Maximum claimed speed | 0 mm/s | 500 mm/s |
| Camera | See the manufacturer documentation for the current configuration. | Low-frame-rate 720p camera with timelapse |
| Material guidance | Follow the printer and filament manufacturer guidance for the selected material and enclosure conditions. | Ideal: PLA, PETG, TPU, PVA, PET, ABS and ASA. PA and PC are listed as capable. |
Running-cost considerations
Maximum speed is not a job-cost result. Filament, purge waste, print time, energy use and failure allowance all depend on the sliced job. Estimate the real cost of a job on either printer.
Questions
Which printer is better?
There is no universal winner. Compare the published specifications, current price and your intended materials and model sizes.
Methodology and limitations
InspectMesh compares stated specifications and use-case implications. It has not hands-on tested these printers for this page. Maximum speeds are manufacturer claims, material results vary, and prices are time-sensitive.
Specifications last checked: 2026-09-20.