Browser-local print planning
Filament Remaining and Job Sufficiency Calculator
Weigh a partial spool, subtract its tare and reserve, then check whether you have enough filament for your next job.
Check one compatible material/spool scope at a time. A job with several filaments cannot use a single aggregate spool weight. Complete consumption already includes reported supports/purge; reserve is an explicit separate input, not another mandatory waste allowance.
Plan your next job
These editable example values are illustrative, not physical print measurements.
Results update as you edit.
Your planning result
- Remaining filament
- 150 g (about 50.3 m)
- Usable after reserve
- 150 g
- Whole job / one-copy surplus
- 105 g
- Complete copies
- 3
The entered estimate fits within your usable filament. Reserve and slicer accuracy still matter.
Method and interpretation
Remaining = gross - tare. Usable = max(0, remaining - reserve). Complete copies = floor(usable / grams per copy). Approximate length uses circular filament area and the chosen density.
Use a measured tare from the same spool type. Include supports, brim, purge and prime structures in your slicer job estimate. No brand tare preset is assumed. Scale accuracy and density affect this estimate.
Method and reference documentation - reference reviewed 4 October 2026. Profile-specific limits still require their own evidence.