Bambu Lab P2S: Specs, Build Volume and Fit Checker
A current enclosed P-series model with a 256 mm cube build volume and newer automation features.
Best for: an enclosed, more automated P-series printer with a modern interface
Status: current. Editorial basis: specification research, not a hands-on review.
Material compatibility guidance
These are conservative, evidence-led starting points. They do not promise compatibility with every formulation, filled variant or spool.
- PLA - likely-capable: This is a hardware-based inference, not manufacturer-confirmed material support.
- PETG - likely-capable: This is a hardware-based inference, not manufacturer-confirmed material support.
- ABS - conditional: This is a hardware-based inference, not manufacturer-confirmed material support.
- ASA - conditional: This is a hardware-based inference, not manufacturer-confirmed material support.
- TPU - likely-capable: This is a hardware-based inference, not manufacturer-confirmed material support.
- PA / Nylon - likely-capable: This is a hardware-based inference, not manufacturer-confirmed material support.
- Polycarbonate / PC - conditional: This is a hardware-based inference, not manufacturer-confirmed material support.
- Polypropylene / PP - likely-capable: This is a hardware-based inference, not manufacturer-confirmed material support.
Key specifications
| Build volume | 256 x 256 x 256 mm |
|---|---|
| Enclosure | Enclosed |
| Maximum nozzle temperature | 300 C |
| Maximum bed temperature | 110 C |
| Indicative US price | $549 - checked 2026-09-20 |
Indicative prices are not offers. Verify availability, tax, bundle contents and current price with the manufacturer.
Build-volume fit
Use this printer's nominal build volume in the local fit checker. Confirm reduced usable regions and slicer-specific restrictions before printing.
Check an STL or 3MF against Bambu Lab P2SStrengths and limitations
Potential strengths
- Enclosed 256 mm cube platform
- Higher stated bed-temperature limit than P1S
Important limitations
- Pricing and bundles vary by region
- Build volume is unchanged from P1S
Running cost
Job cost depends on material, waste, print time, electricity and failures, not a stated maximum speed.
Open the 3D Print Cost CalculatorRelevant comparisons
Sources and methodology
Last verified: 2026-09-20. InspectMesh summarises attributable specification sources and has not physically tested this unit.